Thursday, August 20, 2015
I was asked to repair a mural that was painted in a clients' home, the signature at the bottom noted it was painted around 1952 or 1953 and hadn't been touched since then. The paint had begun to chip and flake off in several different areas and the owners were hoping it could be repaired. I've painted a few murals but am not versed in the best way to repair chipped paint so I conferred with a fellow artist, experienced in mural painting and received suggestions on how to proceed. First step was to carefully wash the entire mural surface and there was a layer of a grimy substance especially near the top which had most likely developed over the years.
Next I sanded off the areas that were flaking, which subsequently lead to more flaking paint as I sanded so I needed to be extra careful not to disturb more paint. For sanding, I used very fine sandpaper, 320 grit. Pictured below are the several problem areas.
Once the areas were sanded and clean, I sealed and preserved them with a layer of Liquitex Matte Varnish, to stop any more flaking and preserve the surface to be painted. Once the varnish was dry, my task was to mix the correct colors and touch up the chipped areas. I used several brands of acrylic paints and added Golden Molding Paste added to some of the raised areas to create texture.
This is the finished piece, repainted areas and a coat of Liquitex Matte Varnish applied to the entire mural to seal and protect it for future years.
Tuesday, August 11, 2015
Tomorrow evening I will be speaking about the fine art of colored pencil drawing and demonstrating colored pencil techniques in Jamestown, RI. The presentation is free and open to the public, everyone is invited. All information is on the flyer.